Estudio y dimensionamiento de un sistema de acoplamiento eléctrico mecánico para el sistema de turbina con motor de 3 hp.

Abstract

The present work is a redesign of the module Micromaster 440 located in the control laboratory and Automation of the Faculty of Technical Education for Development FETD. It describes the operation of elements and electrical equipment of a turbine system with 3hp motor that is controlled by a frequency inverter. The methodology is descriptive and empirical since it is necessary to detail the characteristics and operation of a module called Micromaster 440 that is out of use because it never had operation with load only to the vacuum and with the course of years has deteriorated. The design proposal for the Micromaster 440 module is based on the theoretical knowledge of pulley transmission. Calculations are made to determine the drive shaft, pulley and belt to support 1750 rpm given by a 3hp mot or fed at 440 volts and 2 amps. The result obtained is access to check measurements under vacuum at full load, with a real load that is in an industrial electric drive with three-phase motors.